Apex Customs Wheel Foaming Kit (Apex Customs X P&S) (*)

Description

This Bundle consists of:

• Apex Customs Pump Foamer 2L
• P&S Brake Buster Wheel Cleaner 3.8L

The Apex Customs Pump Foamer is a professional grade large pump displacement sprayer and atomiser, designed to produce a consistent and lush foam from either a concentrated or diluted soap mixture for cleaning purposes. This is especially useful for applications where there is no access to a continuous supply of water or a hose.

Results are enhanced if the cleaning reagent used contains foaming agents which help produce a richer foam consistency while reducing the amount of detergent required.

User manualhere

Note:

1. Alwaysdepressurize the chamber after use to prevent wear on the seals. This is essential to prevent leaksand failure at the seams particularlythe base of the unit. Failure to do so will void the warranty of this product.
2. Also recommended to empty the contents and rinse with water after use to prevent clogging of the nozzles.
3. You can also adjust how thick or patchy you would like the foam to be by removing the felt filters and adding spacers that are included in the unit from the factory. Refer to the image below:

   

Made in Italy.

Warranty = 90 days

Technical Specifications:

Total capacity ml 1860 Operating capacity ml 1000 Gasket VITON Nozzle fan effect Watertight no Safety valve yes Max pressure bar 3.00 Pumping rod PP Packing bulk

P&S Brake Buster Wheel Cleaner safely removes accumulated brake dust, oil, dirt, stains and light corrosion from wheels without damaging the surface.

Brake Buster Wheel Cleaner is a unique cleaning gel that adheres to the wheel surface and penetrates the dirt deposits to clean them away.

Brake Buster contains corrosion inhibitors that leaves a layer of protection on the wheel to protect from future corrosion.

Additional Information:

• Acid Free
• Foaming Wheel Cleaner
• Safe on all Wheel Surfaces
• Removes Brake Dust

Directions:

• Shake the bottle.
• Cover the rim surface with Brake Buster. We recommend that you spray as needed and cover the entire surface. The product is effective at dirt removal so a little goes a long way. Besure it contacts the entire surface.
• Allow the product to dwell for 30 to 60 seconds. (Up to 2 minutes) in the shade. Do not allow it to dry in the sun.
• Lightly brush and wash as required.