0.01 Micron KSI ECOCLEAN Line Filters (35 to 1300cfm) (ISO CLASS 1)

Description

Promotion! For a limited time: Buy 1 filter get 25% off a replacement element automatically at checkout

ELEMENT TYPE Solid Particulate& Oil Coalescing PERFORMANCE ISO CLASS 1 (per ISO 8573.1)
Max Particle Size: 0.01 micron
Max Oil Content: 0.01 ppm (mg/m) PRESSURE 35 to 765cfm models: 232psi
885cfm models: 195psi
1300cfm models: 152psi DIFFERENTIAL PRESSURE DRY / WET 1.1psi / 1.6psi DIFFERENTIAL PRESSURE GAUGE Optional Add-On TEMPERATURE 33.8-248 F AUTOMATIC FLOAT DRAIN OUTLET 1/8″ NPT RECOMMENDED ELEMENT LIFE 12 month (8000HR) WARRANTY 1-Year

Clean dry air is crucial tothe performance of any compressed air system along with the downstream components. Line filtersremove impurities such as solid particles, dust, dirt, rust, scale, oil, and condensate.

KSI’s ECOCLEAN Advanced Premium Filtration (APF) line is manufactured in accordance with DIN ENISO 9001 quality assurance standards, and is 100% leak tested. ECOCLEAN filters alsoexceed ISO 8753-1:2010 standards for compressed air purity,carryCanadian Registration Numbers (CRN)for North America, and approval for fluid group 2 in accordance with Pressure Equipment Directive 2014/68/EU, module B+D (category IV).

ECOCLEAN Filters are available in 25 micron, 1 micron, 0.01 micron, as well as Water Separators, Molecular Sieve, and Activated Carbon.

FEATURES:

• Connections 1/4″ to 3″ and flow capacitiesup to 1300CFM
• Advanced performanceparticulate and oil filtration with high-density deep-bed pleated elements for increased filtration surface area
• Arc-shaped air inlet for 75% less flow resistance, up to 55% less differential pressure loss, significantly more energy efficient
• Automaticcondensate drain, operates via internal floatwith manual override
• Aluminum die cast housing, cathodic dip coating (e-coating) inside and out, and external powder coat for a lightweight, tough, and corrosion resistant housing
• Special adhesive secures element end caps, prevents blooming and bacterial growth
• Highly efficient polyester drainage layer, protects against inflating effects and cracking, prevents re-entry and favors coalesce and drainage
• Top-mounted Differential Pressure Indicator, optional add-on (not included)
• Simple service, remove filter bowl to replace internal element
• Condensate drain installed in housing adapter allows for quick external removal (70cfm and above models only)
• Serviceable with Line Filter Replacement Elements, and Replacement Float Drain
• Optional Wall Mount & Filter Connect Kit Available

VIEW DIMENSIONAL DRAWING & PRESSURE CORRECTION TABLE HERE

A 10psi pressure drop represents a 5% increase in energy cost
Over the 10 year life of a compressed air system, on average the cost of energy to run the system far outweighs the capital investment of buying it.Maintenance costs may not bemuch, but it is extremely importantbecause it directly impacts energy efficiency and system health.Neglected filters create a constant pressure drop, which destroys the energy efficiency of your system while entrainedoil, water, and particulate destroys system components. Protect your equipment, tools, processes, and ultimately your business with proper air treatment and regular maintenance!

For every compressed air system, we highly recommend installing Air Dryer, Water Separator, 1 micron Line Filter, and 0.01 micron Line Filter for the highest quality air.

Where to install the 0.01 Micron Filterin your compressed air system:

• In a system with aRefrigerated Air Dryer:

• Air Compressor Receiver Water Trap1 MicronFilter Refrigerated Air Dryer 0.01 Micron Filter

• In a system with aDesiccant Air Dryer:

• Air Compressor Receiver Water Trap 0.01 Micron Filter Desiccant Air Dryer 1 MicronFilter

• In a system at thePoint of Use:

• Water Trap1 Micron Filter 0.01 Micron Filter Point of Use Connection